Vehicle Articles:

Engine Related Articles:

>> Blog Navigation


>> Welcome to The GotTransmissions.com Blog

Used Engines are Affordable, Reliable and Ready to Ship ASAP.

November 30th, 2009
Used Engines

Used Engines

“Where Our Customers Send Their Friends”

I’ve lived in Fort Pierce Florida for 30 plus years now. Been a mechanic in town for 28 years and was self employed in the automotive repair business for 25 years. To put it simply, our tiny town was devastated by the hurricanes in 2005, from which we recovered only to be devastated by the economy, now. I bring this up because I am doing some repair work on my 1995 Buick Roadmaster station wagon and visited the best parts store in town. They have even started to sell good used low mileage engines for folks who can’t afford expensive engine repairs or rebuilt engines.

Victor, who I have known for every bit of the time I have lived here, in fact h was the first person I met in town and is still a close friend who I enjoy seeing and talking with. To be more detailed, Victor has been working for the same parts supplier for over 30 years as well. He manages the whole operation.

He was saying that business is still in the dumps by and large. Reasons being that a lot of the repair shops who bought from him went out of business and the ones hanging in there are hurting. For what ever reason, we have been hit hard and there is not much light at the end of the tunnel for a economic improvement in the near future. As I mentioned, they have been selling more used engines than ever, people can’t afford rebuilt engines in our town for the most part.

He was saying that the used engines actually seem to have less issues or problems than, the rebuilt engine line. Vic is not a mechanic by trade, all he knows is what people are buying now. Actually Victor was surprised that used engines are such a big hit. So he has set up an account with the most trusted supplier of used engines in North America.

We both agreed that bad economy or not, a good used engine with low mileage is the way we would go if we needed to replace our engines.

Take Victors advise, even if you go right to the horses mouth and cut him out,  buy the type of our replacement engines that suits your car and budget the best, buy good used engines from the same place place Victor trusts, GotEngines.com @ 1-888-344-8044.



Engines for Sale..Rebuilt for long life, very affordable..

November 30th, 2009

Being inside an engine supply company warehouse is very overwhelming for an old engine junkie like me. The site of hundreds of engines for sale stacked in an orderly and sensible system, where every engine is in the proper location for easy identification is a sign of an organized well run company.

Most people envision some sort of “junk yard” atmosphere, where the place is greasy and unorganized. Having employees who many people might think rode the “short bus” to school. The junk yard type of engine supply atmosphere is alive and well. Many people simply do not know that there are other alternatives to the old fashioned hunk yard.

The picture of a clean, well organized engine supplier with modern equipment used to catagorize every engine for sale is relativly new. The idea of a company that specializes in selling all sorts of replacement engines is going to become popular as more people keep their cars instead of trade them in or send them to a ‘junk yard’.

The company who really put this type of specialization into engine replacement was thinking ahead of the times when they instituted this plan. It has been sensationally successful. Other companies are trying this setup as well, but as in the case of many pioneers in any phase of industry or life, we made the mold and the other suppliers are playing catchup.

Like a great football team with excellent ownership and the proper coaches, we have a similar setup. Our representatives are hand picked. They have to be specialists in engines and poses the necessary people skills that allow them to listen to your problems and needs so they can provide an answer that suits your best interests. All put in term you understand.

GotEngines.com sells all types of engines. From rebuilt engines, low mileage used engines and a full line of JDM engines for sale for cars with foreign engines. When I tell you that every engine has passed a rigorous pre testing procedure and is guaranteed to relieve the pain associated with not having a set of wheels, and the obvious expense of replacing your engine, believe me. Plus, as I said earlier, the facility is like a hospital it is so clean and well organized. Call us @ 1-888-344-8044, and make us put our put up or shut up.



Greater Fuel Economy from Chevy Engines.

November 29th, 2009
Chevy Engines

Chevy Engines

“Where Our Customers Send Their Friends”

GM has committed to multiple fuel-saving technologies across its car and truck engines line.  The all-new 2009 Chevy Traverse crossover, for example, enjoys the best highway fuel economy (24 mpg for 2WD models) of any eight-passenger SUV, thanks in part to the new Chevy Engines, one being a 3.6L V-6 with variable valve timing and direct injection technologies.

Their commitment applies to a bevy of fuel-saving and emission-reducing technologies already on the road in GM cars and trucks around the world. These vehicles include more than 3.5 million vehicles with variable valve timing (VVT); 700,000 vehicles with direct injection; 800,000 vehicles with Active Fuel Management™ cylinder deactivation technology, which automatically lets the engine run on half of its cylinders when full power is not needed; 200,000 vehicles with turbocharged gas engines; and 42,000 vehicles with both direct injection and turbocharging. Facts from http://www.gm.com/

GM is also a major proponent of growing the infrastructure for alternative bio-fuels, such as E85 ethanol, and it strongly supports research that will bring ethanol from non-food sources into the marketplace. GM has more than two million E85-capable vehicles on the road, more than any other automaker.

This is only one of the new technologies being provided to the public. Hybrid technology is the other. There are many technologies still in the research and development stages with lots of potential. I say lots of potential because until it becomes approved for production, it only has potential.

Understanding what E-85 flexfuels are may be helpful in understanding why Chevy and GM are so hot on flex fueled vehicles. Hopefully, we have demystified what flex fuels are and how we will use this type of fuel in the future. We have more interesting information on motors” “engines in our blog, please enjoy it. GotEngines.com @ 1-888-344-8044 provides this information as a courtesy and educational device for our customers.




Chevy Engines: What does E-85 FlexFuel Stand For?

November 29th, 2009

E85 is the term for motor fuel blends of 85 percent ethanol and just 15 percent gasoline. E85 is an alternative fuel as defined by the U.S. Department of Energy for automobile engines. Besides its superior performance characteristics, ethanol burns cleaner than gasoline, it is a completely renewable, domestic, environmentally friendly fuel that enhances the nation’s fuel economy and energy independence.

E85 FlexFuel = E85 flexible fuel vehicles are designed to be able to run on E85 ethanol, gasoline, or any blend of both fuels. The engine control module in a flexible fuel vehicle helps to identify what fuel or blend of fuels is running through a vehicle’s system. Based on the data provided, the system then makes adjustments accordingly. In 2007, GM will offer 17 E85-compatible models totaling about 400,000 vehicles, compared to nine models in 2006. GM’s E85 FlexFuel models operate on a mixture of up to 85 percent ethanol and 15 percent gasoline. A GM Flex Fuel vehicle can run on 100 percent gasoline, E85 ethanol or any combination of the two. The company has already more than 2 million flex-fuel models on North American roads.

FYI: Have you noticed that when you gas up your car their is a sign on the pump that says “contains up to 10% ethanol”? That means that the gasoline has up to a 10% amount of ethanol in it already. In essence, we are using a mild form of flex fuel.

However, don’t mistake this for being a true Flex Fuel. If your car is not specifically designed for FlexFuel don’t use E-85 fuels, you will damage your engine. Although there are not many cars on the road with flexfuel, there will be in the future. We are prepared now to service your engine replacement needs and expect to be fully prepared as the FlexFuel vehicles populate the roads in the future. GotEngines.com @ 1-888-344-8044.



Motors” “Engines-What is the difference?

November 28th, 2009

Originally, in the 1800′s, the term engines and the term motors were used to differentiate between the well known steam engines and ‘new‘ design of power-plant called gasoline or diesel engines. The reasoning behind this was that gasoline or diesel engines were new at the time. In order for people to be able to distinguish between the two in the early stages of use, the terms were not interchangeable.

motors" "engines

motors" "engines

An engine is a device or machine designed to produce force, power or motion from another source of energy such as gasoline, diesel fuel or steam, and some modern fuels being experimented with as alternative fuel sources. As steam engines became less popular and started to phase out, the terms started to take on separate meanings.

Now we generally associate the term engine with a car or truck or any vehicle powered by the above fossil fuels (gasoline-diesel). However, the term motor applies as well as the term engine. Some folks still refer to car engines as car motors. In reality the term engine is the preferred term used today when speaking of the power-plant in a car, truck or a piece of construction equipment.

The term motor has become popular to describe many other types of engines. Specifically we call engines that use electricity, “electric motors”. In fact the term electric engine may be confusing to much of the population since they are referred to as electric motors exclusively now. For instance we call the items that operate your electric windows, “electric window motors”, or the actuators for your electric door locks, “electric solenoid motors”. Modern cars have electric devices operating all sorts of items you probably have no knowledge of, and we call them ‘motors’ since the majority of them are tiny electric motors.

Lots of large construction equipment are powered by electricity now, and the power-plants are called ‘electric motors’. Take the San Francisco trains for example, they are powered by ‘electric motors’. When we speak of Hybrid cars, there is a distinct difference between the gasoline engines used as part of the power-drive system and the part that makes it a hybrid, which is a collection of (car) batteries that provide the power to an electric motor. In essence a hybrid car is a marriage of an electric motor and a gasoline engine.

As recently as the 60′s people called car engines, motors. As someone who had the great fortune to be a teenager in the ’60′s, when (real) muscle cars were alive and well, we often called our engines, motors. A great example would be the ‘big block’ Chevy engine in the 60′s, which was 427 cubic inches of raw power was called the “rat motor” by racing enthusiasts in every type of racing in the day. I still call it a rat motor, but if I was to need to buy one now, when I placed my order, I would use the term big block 427 Chevy engine.

A term less used in the ’60′s was the term “mouse motor“, which was the nickname we gave the “small block” Chevy engines. Small block is a very common term, still being used. The fact that engines with the tremendous size of a Big Block are less popular at least in cars due to fuel efficiency and emissions, are being reintroduced in a mild mannered forms in the motorhomes and truck lines, and are completely different from the Rat Motors of my era, and are called engines now.

It seems that the two terms usually have the same meaning when referring to fossil fuel engines. Parts people know the difference, even if the wrong term is used. It seems to me the younger crowd uses the word engine almost exclusively unless it is a component that uses electricity. What about your starter motor? No one calls it a starter engine, but both terms have the same meaning.

Once again, when the electric motor appeared, people saw a distinct difference between it and the steam engine. The steam engine had an obvious source of energy in its fuel, the source of energy of the electric motor was less clear, being supplied mysteriously from a battery or generator by means of wires.

By the time that vehicles driven by internal combustion engines had begun to appear in any numbers, at the very end of the century, both words had become well established in common usage. The power plant was obviously an engine, which consumed fuel to provide motive power. But why the conveyance as a whole was termed a motor vehicle is less obvious. The mere fact of it moving was obviously not sufficient, that was hardly a new idea, after all. Perhaps the need for a more elegant word was needed, and  being able to distinguish the gasoline automobile as a system from anything that exhausted steam and soot, such as the early steam-driven road vehicles like the Stanley Steamer.

Since  the dawn of the twentieth century, the two words have moved together from very different origins. But when new forms of propulsive devices came along,  chance decided which was to be applied in a particular case. Aeroplanes were obviously powered by engines, since the earliest ones were taken over directly from petrol engines of the kind that drove cars. Though there seems to be no clear evidence for the choice.

I could go into detail on the origins of the words and some of the historical uses of engines or motors. For instance a water wheel is a machine for converting the energy of flowing or falling water into useful forms of power, the development of hydropower. In the Middle Ages, waterwheels were used as tools to power factories throughout different counties. The alternatives were the windmill and human and animal power. The most common use of the water wheel was to mill flour in mills, but other uses included foundry work and machining, and pounding linen for use in the manufacture of paper.

That’s about all I can think of in relation to what is the difference between, engines and motors and some of the different uses from ancient civilizations to modern times. Since we are an Engine Supply Company for motors” “engines, we only sell engines or motors that go into cars, trucks and nearly everything that uses gasoline, diesel or hybrid power. GotEngines.com @ 1-888-344-8044.



Engine News: General Motors Develops New Small Car Engines.

November 27th, 2009

General Motors, along with its South Korean subsidiary, GM Daewoo, has partnered with the Chinese company Pan Asia Technical Automotive Center to develop car engines that may replace GM’s 1.6-liter engine worldwide.

Currently, GM’s smallest engine sold in the U.S. is a 1.6-liter four-cylinder which appears in the Chevrolet Aveo. The new engine is a borrowed design from Suzuki. Two versions will be made — a 1.4-liter and a 1.6-liter.

It is said that the new engines would be good for the American market as consumers flock to smaller vehicles. So far, though, both GM and Daewoo have been mum if the engines will be coming to the U.S.

While such engines are in demand across the world, Americans, who desire both power and fuel efficiency, some will balk if the former is compromised no matter what the fuel savings.
Plenty of US citizens do support fuel savings over performance. My suspicion is that small automotive engines will infiltrate our market more and more as fuel costs increase and emission standards are increased also. In fact it seems to be very competitive between individuals as well as car manufacturers to compete and get the best mileage and maintain reasonable performance.
We sell an increasingly larger and larger amount of very fuel efficient and surprisingly powerful small car engines due to the growing amount of small cars in our country. Most of these engines are used engines with less than 40,000 miles on them. GotEngines.com provides true value at affordable costs. Call us @ 1-888-344-8044, and don’t forget to ask about our nationwide parts and labor warranty.


PT Cruised Engines For Sale Cheap and Reliable..

November 27th, 2009

2004 Chrysler PT Cruiser Problem. Is it an innocent Engines fault? This is the question:

Long Question: My model is a touring edition with cruise control. Automatic transmission. After an oil change i had a few months ago, I had a problem where the engine would shake while I’m stopped at an intersection or in idle, but it would only do it while the A/C was on. Then about mid-may i had a problem where I was driving on the highway at around 70mph and the car just started slowing down. I didn’t have my foot on the brakes, I had it on the accelerator, and it just kept losing speed. When I got it to start picking up speed again it wouldn’t let me go over 65mph. Recently after that it started doing it frequently, and when it does this I can use cruise control at all. I was able to get the car running right sometimes by turning the car off and then back on. Then a few days ago I tried to go into town and the problem showed up again as usual and I pulled off the road to restart it and when I tried to turn it back on it just made a repetitive clicking noise, and it wouldn’t turn on at all. Has anyone had the exact same problem cause I don’t know what’s wrong, but I start college in a couple weeks and I need my car fixed before then.

Short Response: Yeah, yeah, yeah, this is a really common question with a fast answer. You probably do not have an engine problem, you may have an ECU problem or a TCU problem or you  have a transmission problem. If I owned this car I would take it to the dealer or a competent repair shop ASAP and have a diagnosis performed and get the problem fixed fast. Or you will end up with a considerably more expensive issue, assuming this problem JUST started.

Essentially, the computer is sensing a problem with the transmission, most probably. Regardless, whatever is happening is more than likely, the computer is sensing the problem and throwing the car into “limp-in” mode. No matter what is causing your car to “limp”, it is a signal or sign that something is obviously wrong and needs repairs. It is factory setup so the transmission basically sticks in 2nd gear, obviously inhibiting the cars performance so you will, take it in immediately for repairs, do not exacerbate the problem by waiting around or spending a lot of time waiting for some forum junkie to supply the answer you want to hear.

Hopefully, your question is answered. Although this is a common complaint, it needs a qualified diagnosis by someone who has a diagnostic scan tool and knows how to use it. Realistically speaking, problems on modern cars can not be accurately diagnosed without having the car hooked up to a diagnostic tool. Don’t waste your time, or more important, your money. For more answers call one of our experts at GotEngines.com @ 1-888-344-8044 now, for some free, quality advise.



Chevy Engines: Gen Four LS2 and LS7 engines for sale.

November 26th, 2009

It’s works for me that during the 50th anniversary year of the small-block Chevy engines, possibly its two greatest variations have been released. Number one is the 400hp 6.0L LS2 arrived for the 2005 model year in the latest-generation Corvette, the second one came recently that the giant-killer small-block Chevy engines, the 500hp 7.0L LS7 that will arrived in the fall of ’06 in the Corvette Z06.

Looking back, the small-block engine design that debuted with 265 ci and 195 hp doesn’t seem like much of a world beater, but in its day, it was a world-class engine with lightweight head and block castings and an overhead valve-train that was ahead of its time. Looking at the Gen IV LS6/LS7 engines we see race-bred technology, including lightweight valves, cross-bolted main bearing caps, and rollerized rocker arms. Back in 1955, Chevy’s new small-block was just as revolutionary, and in those days, it too was regarded as being heavily influenced by racing technology.

Out-of-the-box performance from GM means you can have a factory-direct LS2 shipped to your door for about $6,500.00.  It comes with a standalone wiring harness and controller, but bolting it into anything that didn’t originally come with at least a Gen III small-block is up to you to figure out.

GM actually refers to the current LS2 and LS7 as fourth-generation revisions of the original design, although the only direct holdover to all four generations is the 4.400-inch center-to-center bore spacing. Since so many critical dimensions have changed over the years to the point that there are no interchangeable parts, it is easy to see why we call this engine a direct descendant of  GM’s bread-and-butter small-block V-8s. Because they still feature a cam-in-block design with push-rod-activated valves is enough for us to issue a pass on the subject.

Compactness, simplicity, and durability are three trademarks the latest Gen-IV small-block shares with its ancestors.

The push-rod engine design has the built in advantage of being compact and has less components than non push-rod engines, and that continues to be an advantage as long as they continue to keep the cost, weight, and friction down and the valve-train speed up to produce the power necessary.

We have these engines in stock and ready to go for a far better price then the dealer or any other engine supplier for that matter. Call GotEngines.com @ 1-888-344-8044 and speak with an engine expert and buff about buying LS2 or LS7 engines for sale at an unbeatable price. Guaranteed. You can find more articles in our blog that interest you too. Sign up a free subscription today, and enjoy.



Ford Engines: Ford Performance Engines for Sale.

November 25th, 2009

The “baddest” of Ford engines ever developed occurred during a rush, 90-day research and development program in 1964, the 427 SOHC engine was Ford’s response to the Chrysler Hemi’s dominance in NASCAR during the ’64 racing season. Based on the successful 427 FE engine, the cammer featured a chain-driven roller cam in each cylinder head, actuating big valves in hemispherical combustion chambers. Horsepower was rated at 616 for the single four-barrel version and 657 for the dual quad, and Ford tested the factory engines to more than 8,000 rpm on the dyno. The engine was shaping up to be a formidable NASCAR competitor.

Unfortunately for Ford, a variety of factors conspired to keep the engine from being approved for NASCAR racing, including screams of protest from Chrysler and the higher speeds the SOHC would undoubtedly bring to the racetracks. Having made the commitment to limited production and unable to compete with the engine in NASCAR, Ford scrapped its plans for building cammer Galaxies for NASCAR conformation and focused on promoting the 427 SOHC as a drag racing engine. It immediately made its mark on the dragstrip in the world’s first flip-top blown fuel Funny Car, owned and driven by Jack Chrisman’s in a ’65 Mercury Comet.

In 1966 Sneaky Pete Robinson won the NHRA Top Fuel crown with his SOHC-powered dragster, and in 1967 Connie Kalitta (The Kalitta family still races funny cars today) won the AHRA Winter Nationals and the NHRA Winternationals with his SOHC rail. With Danny Ongais (another great old name) driving, Mickey Thompson dominated the new NHRA Funny Car class in 1969 with his awesome cammer-powered Mach 1s. Racing legends such as Ohio George Montgomery, Dyno Don Nicholson, Les Ritchey, and Don Prudhomme also campaigned cammer race cars in the ’60s and early ’70s, and the sounds of the SOHC zinging to 9,000 rpm were not uncommon at dragstrips across the country.

Never made available in a production vehicle, the estimated 750 to 1,500 SOHC crate engines sold over the Ford parts counter were raced heavily in the late ’60s and early ’70s. But after Ford withdrew factory support, the parts supplies began to dry up, and by the late ’70s, a SOHC became an unusual sight. By the ’80s and ’90s, the engine had acquired collector status, with few engines together and running and small caches of scarce SOHC parts scattered in unknown warehouses and garages from coast to coast. Enthusiasts interested in building a cammer were forced to collect the factory parts piece by piece, often over many years, before a complete engine could be assembled.

Nevertheless, interest in the 427 SOHC endured, and over the last few years several manufacturers have stepped up to fill the demand for the parts required to build these legendary engines. In fact, it is now possible to build a complete cammer from scratch, using only aftermarket parts.

I grew up during that era and it was no secret that the cammer was one super fast engine. The facts, names and information is as clear today to me as it was when I was in my teens. It is etched in granite forever based on the time I spent dreaming and playing with hot rods. While GotEngines.com may be the most respected engine supply company in the USA, we only sell car and truck engines and some marine engines that are interchangeable with a car engines, the trivia and information provided in this blog is here for your convenience and to help you educate yourself on automotive engines. GotEngines.com @ 1-888-344-8044.



Chevy Engines: Big Block 454 Engines for sale

November 25th, 2009

Question: I’m having a problem with my engine bogging at 5,000 rpm in Second gear and 4,000 rpm in Third. I think it could be one of two things: my intake manifold or rearend gear ratio. It’s a 454 with Edelbrock oval-port heads, a Comp 268 cam, a 750 Holley, a TH350 trans, and 3.07 gears with 30-inch-od tires. The intake is a Performer 2-O. What about this combo can I change to fix this problem?Kevin Williamson,  Mobile, AL

Chevy Engines

Chevy Engines

Possibilities: Bog is a vague term that may mean different things to different people. Here, I interpret what you call bog to mean the engine flattens out and doesn’t want to rev or pull at rpm in gear. Yes, Chevy Engines aka “Rat motors” will run better with a Performer RPM intake and 3.55 or 3.70 gears, but the existing hardware should not be causing the car to flatten out at 4,000-5,000 rpm. Almost certainly, you have a fuel-delivery or tuning problem. A marginal fuel-delivery system can be crutch-ed in the lower gears because low gears provide a torque multiplication assist. In the higher gears, the engine must accelerate the weight of the car on its own, which can put a marginal fuel-supply system over the edge.