Things you’ll want to replace when installing a replacement transmission…
- Filter and all external gaskets
- All external seals
- Torque converter seals
Important Procedures…
- Flush and inspect transmission cooler and cooling lines
- Ensure cooler is flowing properly
- Completely flush the transmission
- Reset, clear codes, re-flash PCM or reprogram as required by manufacturerÂ
Other Recommendations…
- Prior to installation compare wiring connectors and solenoids for compatibility
- Inspect, clean and repair damaged wiring or solenoids
- Replace mounts or hydraulics with known good units as they are not covered under warrantyÂ
