Virtually the same way parts come from the robots out of nowhere to assemble and install all of the components on Ford Duratec Engines, very much like the factory. The video shows some of the critical steps in the operation. Such as the valve-train, which includes the camshaft, valves, lifters and the rest of the valve-train team. The crankshaft is pushing on the connecting rods up and down, in turn allowing the pistons to go up and down.
There is a means to the madness of assembling an engine. A particular order must be followed as the video demonstrates or the engine can not be assembled in full without some disassembly. Once the assembly is finished the engine goes into a sealed testing room. In this room we will find a gigantic engine dynomometer.
An engine dynomameter is a piece of equipment that the engine bolts into and is tested. The dyno, puts the engine through a short break-in procedure, then goes on to simulate all driving conditions while monitoring every function of the engine. At the end of the test cycle the engine has either passed the test or is rejected and on to the engine hospital.
GotEngines.com only sells engines that have been through a dynomometer testing procedure. By doing so we know that the engine you buy will operate perfectly from the first time you start it, and last a long time. Call us Now at 1-888-344-8044 and speak with a trained representative about how we can outfit you with the engine of your choice.
